FREE SHIPPING FOR ORDERS OVER $150 TO AB, BC & SK

HEADSET COMPATIBILITY FOR SIGHTLINES™ STANDARD / UNIVERSAL GEL EAR PADS WITH PRESSURE-SENSITIVE ADHESIVE BACKING:

COMPATIBLE HEADSETS WITH NO ADDITIONAL ADAPTER PLATES NEEDED:

This Sightlines gel ear pad model is fully compatible with many Howard Leight®, Peltor™, and Ops-Core™ headsets without any adapter plates. The adhesive is non-permanent and pads can be removed dozens of times, or even swapped between headsets, without degrading the bonding strength. With our adapter plates, you can use these same pads on an even wider selection of headsets. We use the same type of adhesive that is used on military headsets to hold pads in place. There is an outer lip on this pad that slides under the Howard Leight® headset retaining clips and provides a secondary method to secure the pads. Please see our INSTALL page for more details.
-
This model is also compatible with any headset that utilizes oval pads that are 4" tall x 3" wide and allow users to peel off / remove their original pads and apply new adhesive-backed pads.
-
3M™ WorkTunes™ Wireless / Bluetooth model (please do purchase our Peltor™ HY79+ HY80 cloned adapter plates if you own the old-style WorkTunes headset that only has an AM/FM radio)
-
3M™ Peltor™ RangeGuard™
-
3M™ Peltor™ Sport Tactical 100 / 300 / 500
-
Awesafe® GF01
-
Axil® / Sportear® Trackr™
-
Caldwell® E-Max (standard and low-profile)
-
GLORYFIRE™ M8056T
-
Howard Leight® Impact® Sport (including Bolt® version)
-
Howard Leight® Impact® Pro
-
Howard Leight® Leightning®
-
Howard Leight® Sync®
-
Howard Leight® Verishield
-
Howard Leight® Viking®
-
Kask® SC1 / SC2 / SC3
-
Mpow® Noise Reduction Safety Ear Muffs
-
Ops-Core® AMP® (note: outer lip may overlap and need to be removed with knife / scissors, but this is only an aesthetic issue)
-
NoiseBuster® PA4000, PA4100, and PA4200
-
Peltor™ RangeGuard™, Sport Tactical 100 / 300 / 500
-
Pro Ears® - multiple models compatible; customer must verify that their original pads can be peeled off and our oval 3 x 4" pads can be glued on
-
Radians® - multiple models compatible; customer must verify that their original pads can be peeled off and our oval 3 x 4" pads can be glued on
-
TR Industrial® Forestry Safety Helmet and Hearing Protection System
-
Winchester® Passive Folding Earmuffs / Low Pro Passive Folding Earmuffs

---------------------------------------------------------

WG200 SNAP-IN PLASTIC ADAPTER PLATES FOR MOST WALKER'S GAME EAR® HEADSETS -- HERE ARE THE COMPATIBLE HEADSETS:

Walker's Game Ear® Razor™ Series (including SLIM and COMM BT and PATRIOT model but excluding the COMPACT version of the series)
-
Walker's Game Ear® Ultimate Power Muff (including Alpha and Quad version)
-
Walker's Game Ear® Ultimate Quad Connect
-
Walker's Game Ear® Ultimate Digital Quad Connect
-
Walker's Game Ear® Ultimate Digital Quad 4x4
-
Walker's Game Ear® XCEL™

---------------------------------------------------------

MS200 SNAP-IN PLASTIC ADAPTER PLATES FOR MOST SORDIN® / INVISIO® / TCI® HEADSETS -- HERE ARE THE COMPATIBLE HEADSETS:

Invisio® T5 (please transfer o-ring from original snap-in plates onto our plates if applicable)
-
Sordin® Supreme™ including all variants like Pro X (please transfer o-ring from original snap-in plates onto our plates if applicable)
-
TCI® Liberator™ / DEHP™ / HP™ (please transfer o-ring from original snap-in plates onto our plates if applicable)

---------------------------------------------------------

PL200 SNAP-IN PLASTIC ADAPTER PLATES FOR MOST PELTOR TACTICAL HEADSETS -- HY79 / HY80 CLONE -- HERE ARE THE COMPATIBLE HEADSETS:

If your headset is not listed below but is compatible with the HY79 or HY80 hygiene kit, then it is guaranteed compatible with our model.

OUR PELTOR™ HY79/HY80 MOUNTING PLATE CLONE DOES NOT FIT RANGEGUARD™, SPORT TACTICAL™ 100 / SPORT TACTICAL™ 300 / SPORT TACTICAL™ 500, OR THE WORKTUNES™ WIRELESS / BLUETOOTH MODEL. PELTOR™ MADE A NEW ADAPTER PLATE THAT LOOKS SIMILAR TO THIS ONE BUT IS NOT THE SAME SIZE. FORTUNATELY, PELTOR™ CHOSE TO MOUNT THEIR PADS TO THE UNDERLYING PLASTIC MOUNTING PLATES USING ADHESIVE, SO YOU CAN PEEL THE FOAM PADS OFF (IT TAKES FIVE SECONDS), CLEAN OFF ANY RESIDUE, AND THEN ADD OUR STANDARD / UNIVERSAL ADHESIVE-BACKED PADS TO THAT UNDERLYING PLASTIC MOUNTING PLATE.

-
3M™ Worktunes™ AM / FM (original model only, not Wireless / Bluetooth model; please read warning above and instead just order our Standard / Universal Mount pads with adhesive backing if you have the Wireless / Bluetooth model)
-
3M™ Peltor™ ComTac™ II / III / XP / XPI
-
3M™ Peltor™ ProTac™
-
3M™ Peltor™ Shotgunner™
-
3M™ Peltor™ Sound-Trap™
-
3M™ Peltor™ Sport™
-
3M™ Peltor™ SportTac™
-
3M™ Peltor™ SWAT-Tac™ II / III
-
3M™ Peltor™ Tactical 6-S
-
3M™ Peltor™ TacticalPro™
-
3M™ Peltor™ Tactical Sport™
-
Racing Electronics® Platinum Plus headsets

 

---------------------------------------------------------

XS200 CLONE OF PELTOR™ HYX1 / HYX2 / HYX3 / HYX4/ HYX5 HYGIENE KIT SNAP-IN PLASTIC ADAPTER PLATES -- HERE ARE COMPATIBLE HEADSETS:

If your headset is not listed below but is compatible with the HYX1, HYX2, HYX3, HYX4, or HYX5 hygiene kit, then it is guaranteed compatible with our model.

3M™ Peltor™ X1A
-
3M™ Peltor™ X2A
-
3M™ Peltor™ X3A
-
3M™ Peltor™ X4A
-
3M™ Peltor™ X5A

---------------------------------------------------------

PM200 CLONE OF PELTOR™ HY10 HYGIENE KIT SNAP-IN PLASTIC ADAPTER PLATES -- HERE ARE THE COMPATIBLE HEADSETS:

If your headset is not listed below but is compatible with the HY10 hygiene kit, then it is guaranteed compatible with our model.

3M™ Peltor™ 95 / 98 / 101 / 105 / III and Professional Model

---------------------------------------------------------

SR100 SIGHTLINES™ GEL EAR PADS WITH REAR RUBBER FLAP MODEL -- HERE ARE THE COMPATIBLE HEADSETS:

If your headset is not listed below but has factory-provided 4" tall x 3" wide oval ear pads with a stretchable rear flap that is pulled tightly over a flange, then it is likely compatible with our Rear Rubber Flap model of Sightlines gel ear pads. Please note that these pads are not compatible with any of the above-listed adapter plates. Some trimming of the rear rubber flap with a pair of scissors may be necessary to successfully mount the pads to your headset.

ASA® AirClassics™ HS-1A
-
Audio Technica® M30x / M40x / M50x
-
AvComm® AC-200
-
Aviation Survival™ Evo™
-
Bose® AE2® / AE2i® / AE2w® / QuietComfort® 2 / QuietComfort® 15 / QuietComfort® 25 / QuietComfort® 35 / SoundLink® (over-ear only) / SoundTrue® (over-ear only): the pads do not snap in like the factory models, but rather the stretchable rubber flap on the rear is pulled over the outside of the headphone and locks it into place (some trimming of retainer may be required, as stated above)
-
Bose® Aviation Headset X® / Aviation Headset A20®
-
Combat Vehicle Crewman helmet headset: inspect your headset, and if the original pads use a stretch retainer to lock into place, then these will work (some trimming of retainer may be required, as stated above)
-
David Clark Company® H10 series / 40523G-01 (similar to H7090) / One-X
-
Decibel Defense™ Professional Safety Ear Muffs™
-
Equipped to Fly™ Alpha™ / Hawk™ / Eagle™
-
Faro® G2 / G3
-
FlightCom® 4DX / 4DLX / 5DX / VENTURE™
-
Gentex® SPH-4®B and SPH-5® flight helmets
-
Heil Sound™ Pro 7
-
Kingston® HyperX™ Cloud™ / Cloud II™ / Cloud Stinger™ / Alpha™
-
KORE® KA-1 / P-1
-
Koss® QZ-99 / R-80 / SB-45 / UR-29 / UR-40
-
Mitchell & Johnson® GL1 / GL2
-
Monoprice® 8323
-
Mpow® 059
-
Pilot USA® - no guaranteed compatible headsets, but our design may work if the original pads are held in place using a rubber flap on the rear (the Sightlines ear pad profile is 4 in / 102 mm long, 3 in / 77 mm wide, and 0.625 in / 15.875 mm thick; the inner opening is 1.75 in / 44 mm wide and 2.75 in / 70 mm long; the rear flap has an inner opening of 1.95 in / 50 mm wide and 3.00 in / 76 mm long and can be modified to fit with a pair of scissors)
-
Pro Ears® - no guaranteed compatible headsets, but our design may work if the original pads are held in place using a rubber flap on the rear (the Sightlines ear pad profile is 4 in / 102 mm long, 3 in / 77 mm wide, and 0.625 in / 15.875 mm thick; the inner opening is 1.75 in / 44 mm wide and 2.75 in / 70 mm long; the rear rubber flap has an inner opening of 1.95 in / 50 mm wide and 3.00 in / 76 mm long and can be modified to fit with a pair of scissors)
-
Racing Electronics® Gemini™ / RE-58 / RE005 / RE016 / RE026 / RT006 / QT-3
-
Rugged Air™ RA200 / RA454 / RA900 / RA950
-
Sennheiser® HD280PRO
-
Shure® SRH 240 / 440 / 840 / 940 / 1540 /1840
-
Sigtronics® S-20 / S-58 / S-AR
-
Sony® MDR-1A / MDR-7506 /MDR-CD900ST / MDR-RF895 / MDR-RF898 / MDR-RF985 / MDR-RF995 / MDR-RF6500 / MDR-V6 / MDR-V700 / MDR-V900 / MDR-ZX770BN
-
Takstar® HI 2050 / Pro80
-
Telex® Echelon™ / Stratus™
-
Turtle Beach® Earforce® XO One / XO Seven / Recon 30X Chat / Recon 50P / Recon 60P / Stealth 400
-
Ultrasone® HFI-580 / 680 / 780